Conjoined Twins Separated with Help of Stratasys 3D Printed Models and VR

3D printing news
2021
09/16
20:27
分享
评论
It was a moment of “unbelievable joy” for the parents of one-year-old twins conjoined at the head after a medical team at Soroka-University Medical Center in Israel successfully performed the first of its kind rare surgery in the country. The planned procedure demanded hundreds of hours of preparation and the help of virtual reality (VR) and sophisticated 3D models for the doctors to practice on provided by additive manufacturing pioneer Stratasys.
The medical team conducted a marathon “life or death” surgery on the infant patients that lasted twelve hours, led by world authority on conjoined twins Dr. Noor Ul Owase Jeelani, a Kashmir-born pediatric neurosurgeon at the Great Ormond Street Hospital (GOSH) in London and founder of Gemini Untwined, a UK Charity set up for the treatment, education, and research of conjoined twins.

wp1.png

Newly separated conjoined twins at Soroka University Medical Center in Israel, look at each other for the first time on September 5, 2021. Image courtesy of Soroka University Medical Center
Apart from the extremely complex operation, physicians told media site The Times of Israel that the babies were connected by the back of their heads – a condition called craniopagus twins – in an area where there was no skin and no skull, which posed an additional challenge for the treatment team. In fact, they had to grow more skin during the months prior to the operation. To do this, the medical team decided to insert inflatable silicone bags into adjacent parts of the twin’s heads, between the scalp and the skull, and start growing skin on top of them.
The center’s pediatric intensive care unit (ICU) director, Dr. Isaac Lazar, said to Israeli online publication that every few days, sterile water was injected into the bags, increasing their volume, which stretched the skin slowly. After five to six months, these water-filled bags and the skin covering them became as big as the babies’ heads. Once the “balloons” were ready, the babies were admitted for surgery.

wp2.jpg

Israeli surgeons plan a 12-hour surgery for conjoined twins using 3D printed models. Image courtesy of 3D4OP/Soroka-University Medical Center.
Conjoined twins are already extremely rare, occurring at a rate of about 1 in 2.5 million births worldwide. But craniopagus twins are even more uncommon, with only 5% of conjoined twins born fused at the head. In addition, they often share large dural sinuses and vascular structures, making surgeries to separate them extremely difficult.
The Israeli medical team headed by Dr. Michael Gideon, Director of pediatric neurosurgery at the Soroka University Medical Centre, has worked with the patients’ parents since birth. Gideon described in his LinkedIn account that planning the operation took an entire year and thanked his dedicated team as well as “the amazing Israeli Medtech startups” that helped with the precise 3D models and VR of the twins for simulation and planning before and during the procedure.

“This is a very rare operation, performed so far in the world only about 20 times and for the first time in Israel in one-year-old babies, one of the youngest in which this procedure was performed,” said Gideon. “The next few days will be critical in the process of the twins’ recovery.”

wp3.jpg

Israeli surgeons plan a 12-hour surgery for conjoined twins using 3D printed models. Image courtesy of 3D4OP/Soroka-University Medical Center.
Assisting the surgeons with the pre-surgical planning process was ISO-certified medical device startup 3D4OP, Stratasys, and Surgical Theater, a U.S. business that markets a surgery rehearsal platform (SRP) for neurosurgical pre-operative planning. 3D4OP Founder and CEO Limor Haviv worked with Gideon to design 3D printed anatomical models to guide the intervening surgeons throughout the surgery. With specialists from many medical disciplines, like neurosurgery and plastic surgery, coming together for one surgery, the 3D models became a key convergence point.
Based on computerized tomography (CT) and magnetic resonance imaging (MRI) scans and using materialise3-Matic medical software, the 3D models were printed using different technologies, described Haviv, and incorporated different materials to mimic the anatomical tissues. The models were then used to simulate the operation, so surgeons could visualize how the actual separation would be performed.

wp4.jpg

Israeli surgeons plan a 12-hour surgery for conjoined twins using 3D printed models. Image courtesy of 3D4OP/Soroka-University Medical Center.
The 3D models allowed them to discern blood vessels from the dura tissue (a thick membrane surrounding the brain), skull, and skin, just like in the actual procedure. Moreover, Haviv said the models were so realistic that they could even be positioned in the same way as the twins would be in the actual operating room (OR), allowing simulation rehearsals for the anesthesiologists. Aside from Stratasys, Haviv and 3D4OP also worked with local rapid prototyping company Laser Modeling Israel and industrial design startup Synergy.

wp5.jpg

Dr. Michael Gideon simulates the surgery using VR. Image courtesy of Michael Gideon.
Performed early in September 2021, the surgery was extremely delicate, as bleeding from major blood vessels in the babies’ heads could have caused a catastrophic result. However, the surgeons said they were confident having rehearsed using 3D printed models and VR. After the massively complex operation, the twins were moved to the ICU, where they first looked at each other and cooed. As the twins recovered from the surgery, Gideon revealed that they were both “conscious and alert and neurologically intact” and started physical therapy roughly a week after the operation. The twins are now expected to lead normal lives.

南极熊3D打印网https://www.nanjixiong.com/转自来自网络:https://3dprint.com/284916/conjoined-twins-separated-with-help-of-stratasys-3d-printed-models-and-vr/

上一篇:Nanoscribe launches Quantum X shape 3D printing system
下一篇:Voxeljet to develop binder jet 3D printer to produce moulds for GE offshore wind
回复

使用道具 举报

推动3D打印

关注南极熊

下载手机APP

联系QQ/微信9:00-16:00

392908259

南极熊3D打印网

致力于推动3D打印产业发展

快速回复 返回列表 返回顶部