Raise 3D（上海复志，原派恩），50台众筹超早鸟准备出货

做一下介绍，本人是刚刚入门3D打印的工业设计专业的菜鸟，想参与3D打印的洪流当中。所以看中了Raies 3D，成为了他们的50超早鸟，也是全球最快收到机子的人（ps：第一批的人员当中，国内就我一个人，根据官方回复），国内基本3天就能到了。
-------------------------------------------华丽的分割线-----------------------------------------

以下是我们收到的邮件，所有出厂的机子，进行了5000小时以上的打印。

文中还提到了美国，欧洲两个人数较多的地区的发货时间。如果有兴趣可以到官网去购买，但是2016年2月份才会发货。

打包看起来也是不错，活动部位都已经用胶带去封号，防止滑动。

机子的软件暂时没有更新到，如果有软件的测评会第一时间与大家分享。。。

期待元旦左右收到机子。到时给大家分享开箱和机子测评。


祝大家元旦快乐！！

Dear Raisers, Great new! We have finished assembling the 50 super early bird N2 printers and tested all of them. It is not easy but we did it. Check out all the machines that are ready and waiting for packing. Our technicians are making the final checks right now. You may notice from the picture that outside is already dark and yes, the picture was taken at 10 PM. We worked extra shift everyday just to make sure that every machine sent to you is in good quality.   We have spent more than 5,000 hours in total on testing those machines. Each machine went through a series of tests including prints from small to large size, dual extruder prints and prints with different materials like PLA and ABS. Here are pictures of the models being printed during the QC process and this is only a tip of the iceberg. (PS: Chinese people love Buddha!) We need a bigger table I guess. Good quality prints and high consistency. 400mm tall Buddhism Goddess from N2 plus. Yummy cupcakes for your holiday The next thing is to pack these machines up and send out to each of you Raisers. Let's take a quick view on how we pack these machines. Before anything, we clean the machine completely and put on all the warning labels. Then, we use 12 clips and other restriction parts to hold all moving parts still so they won't be damaged during shipping. Please remember to take all the clips and restriction parts out before operating the printer. Then we pack all the free tools, power cable, one spool of filament, one USB drive, extra nozzle (for KS stretching reward) and camera (if applicable). A lot of foam is used to protect all of those and the printer. At last we pack the printer and the accessories into a large thick carton box and then it is ready for shipping out. Packing process Free tools, power cable, spool of filament, redundant parts and etc. Ta-da! Your printer is ready to go! Generally, for all Raisers in Europe, your printers will be sent out on 12.26 (UT+8:00) by sea. For all Raisers in the US, your printers will be sent out on 12.30 (UT+8:00) by sea. For the rest, we will ship your printers out as required way. Please wait for your printer to arrive. (This is only scheduled for the 50 super early bird N2 printers.) Thank you all for the support and happy holiday! Wish you all happy and lucky!

每台机测试5000个小时？？？？别坑我，5000个小时是208天…………如果按50mm/s速度，1.75的耗材就要用掉90，000米，大约200公斤的料，按便宜的国产50元/公斤算，都要一万块，求可能性

期待你收到机器以后给做出评测啊！楼主

北极熊 发表于 2015-12-28 17:19
期待你收到机器以后给做出评测啊！楼主

一定的，大家分享，成为一个聚集地，才会有更多人过来分享

jonsonliang 发表于 2015-12-28 22:10
一定的，大家分享，成为一个聚集地，才会有更多人过来分享

是啊，已经把你的投稿推荐到首页了。这款设备取得了不错的众筹成绩，相信真机的使用也会带来惊喜。你这篇文章昨天我发给Raise 3D的总经理看了，O(∩_∩)O~

不错不错看着心动

看着打印质量不错~

阿森纳球童 发表于 2015-12-29 14:00
看着打印质量不错~

暂时还在测试中。。。还没有完善。。单喷头基本没有问题。可是双喷头还存在问题

yjlrb 发表于 2016-1-6 02:18
每台机测试5000个小时？？？？别坑我，5000个小时是208天…………如果按50mm/s速度，1.75的耗材就要用掉90 ...

这句话是厂家提供。。说已经花了5000测试机子。。。估计就是最原始的那台。。。我们新生产肯定没有。这机子从设计到研发生产应该有两年。。他们公司有第一代产品

jonsonliang 发表于 2016-1-7 08:16
暂时还在测试中。。。还没有完善。。单喷头基本没有问题。可是双喷头还存在问题

双喷头作为可选附件是最好的方式。实际用的过程中双喷头很少用到。而且稳定性一般。